Purpose:
An archive of past webinars is provided to CALCE Consortium Members.
Registration requires a
CALCE Web Account (CALCE EPSC Members Only)
Past Seminars:
On Sept 22, 2009
Prof. Patrick McCluskey presented
Power electronics for sustainable energy systems
On Sept 22, 2009 Dr. Michael Azarian presented
Reliability of MLCCs
On August 11, 2009 Dr. Michael Osterman presented
Tin Whisker Research
On July 21, 2009 Mr. Bhanu Sood presented
Degradation analysis of rechargeable batteries
On June 16, 2009, Prof. Bongtae Han presented
Characterization of Chemical Shrinkage and Modulus Evolution
On May 26, 2009 Prof. Peter Sandborn presented
Strategies for management of obsolescence
April 21, 2009, Prof. Abhijit Dasgupta presented
PWA failures under static and dynamic flexural loading
February 17, 2009, Dr. Michael Osterman presented
Reliability of Reworked Lead-free Assemblies
January 20, 2009, Dr. Michael Azarian presented
Electrochemical Migration in Lead-free Electronics
Dec 18, 2008, Dr. Michael Osterman presented
Temperature Cycle Fatigue of SnCuNi
and SAC solders
Nov 18, 2008,
Prof. Bongtae presented
Hermeticity Detection of MEMS Packages with Micro to Nanoliter Cavity Volumes
View/Download Presentation
September 30, 2008
Dr. Diganta Das presented
Electronics Recycling and Its Impact on Part Selection and Management
August 26, 2008 Dr. Michael Osterman presented
Tin Whisker Growth and Shorting Risk
July 22, 2008 Mr. Bhanu Sood presented
Characterization of Halogen-free Printed Wiring Board Materials
Presentation (CALCE Web Account Required)
June 24, 2008 Dr. Michael Osterman presented
Examination of Thermal Interface Materials
Presentation (CALCE EPSC Members Only)
May 20, 2008,
Dr. Diganta Das presented Derating of Power Electronics
Presentation (CALCE EPSC Members Only)
April 15, 2008,
Dr. Michael Azarian presented Early Detection of Interconnect Degradation Using RF Impedance
Presentation (CALCE EPSC Members Only)
Feb 26, 2008,
Prof. Sandborn presented Electronic Part Total Cost of Ownership
Presentation (CALCE EPSC Members Only)
Jan 22, 2008, Dr. Diganta Das Presented Impact of Solder Dip on Part and Assembly Reliability
Presentation (CALCE EPSC Members Only)
Dec. 18, 2007, Dr. Michael Osterman presented Lead-free BGA
Reballing - Package and Ball Attachment Assessment
Presentation (CALCE EPSC Members Only)
Nov. 13th, 2007, Bhanu Sood presented Characterization of PCB Laminate Materials Properties after Lead-free Reflow Cycles
Presentation (CALCE EPSC Members Only)
Aug 28, 2007, Dr. Michael Osterman presented Temperature Cycle Reliability of Lead-free Solder
Joint Interconnects
Presentation (Member's Only)
June 26, 2007, Dr. Diganta Das presented Counterfeit Electronic Parts
Presentation (Member's Only)
May 29, 2007, Prof. Peter Sandborn presented Electronic Part Lifetime Buy Planning and Optimization
Presentation (Member's Only)
April 17, 2007, Dr. Bongtae Han presented
Moisture Ingress, Behavior and Prediction in Polymeric Materials of Semiconductor Packaging
Presentation (CALCE Member's Only)
.
February 27, 2007, Dr. Michael Azarian presented
Reliability of Multilayer Ceramic Capacitors with Flexible Terminations
.
Presentation (CALCE Member's Only)
December 19, 2006, Dr. Diganta Das presented Uprating of Capacitors
.
Presentation (CALCE Member's Only)
September 26, 2006, Dr. Abhijit Dasgupta presented Vibration Durability of Pb-free Soldered Assemblies.
Presentation (CALCE Member's Only)
August 29, 2006, Dr. Michael Osterman presented Durability of Reworked/Repaired and Aged Pb-free Assemblies.
Presentation (CALCE Member's Only)
July 25, 2006, Dr. Abhijit Dasgupta presented Reliable SiP/SoP Technologies: A Physics of Failure Perspective.
Presentation (CALCE Member's Only)
June 20, 2006, Dr. Donald Barker presented Predicting Plated Through Hole Life at Assembly and in the Field from Thermal Stress Data.
Journal paper (CALCE Member's Only)
Presentation (CALCE Member's Only)
February 23 , 2006, Dr. Michael Azarian presented Electrochemical Migration in Printed Circuit Board Assemblies,
Presentation (CALCE Member's Only)
January 31, 2006, Dr. Michael Osterman presented CALCE Simulation Assisted Reliability Assessment Software
Presentation (CALCE Member's Only)
December 19, 2005, Dr. Keith Rogers presented Hollow Fibers in Printed Wiring Board
Presentation (CALCE Member's Only)
