LED Assembly, Reliability & Testing Symposium - November 29 - December 1, 2016

Conference Chair - Dr. Diganta Das (diganta@umd.edu), Ph.D., CALCE/University of Maryland



  

Novermber 29 – December 1, 2016
Crowne Plaza Midtown
Atlanta, GA



Light emitting diodes (LEDs) is increasingly the technology of choice in lighting and display applications. LEDs offer design flexibility, from zero-dimensional (dot-scale lighting) to three-dimensional lighting (color dimming using combination with different colors). LEDs have small exterior outline dimensions while offering high-energy efficiency that results in lower power consumption. With appropriate thermal management, LEDs can have longer lifespans than conventional lighting sources. LEDs are also eco-friendly products with less UV radiation and no mercury.

LEDs had a rapid progression from research laboratories and academic institutions to store shelves and light sockets. This aggressive adoption curve has made LEDs ubiquitous across multiple applications, including automotive, industrial, sports, and entertainment lighting systems. However, the main challenge to an even wider deployment platform for LEDs is the disconnect between the potential performance observed in laboratories and the real performance observed in the field.

The LED Assembly, Reliability & Testing (A.R.T.) Symposium will provide attendees with information to bridge the gap between the semiconductor physics and the architectural design level issues in LED supply chain. The design, manufacturing, reliability assessment, testing and inspection of LEDs and LED lighting products are not at the same level of development and interest. The LED A.R.T. Symposium is the forum for the industry to explore the problems faced and offer solutions.



CLICK HERE to Register

For more details on the Program, please contact Dr. Diganta Das.

Technical Program

Tuesday, November 29


7:30 AM
Registration
Speaker
Session 1: Opening Session
8:15 AM
Opening Remarks
8:30 AM
9:30 AM
Break
Session 2: LED Materials and Packaging
10:00 AM
10:30 AM
11:00 AM
11:30 AM
LED Applications Beyond Lighting
Girish Wable, Jabil
12.00 PM
Lunch
Session 3: Business Applications of LEDs
1:00 PM
Circular Economy Business models for LED Lighting - Business Case
Nikos Papaoinnou, Corecentric Solutions
1:45 PM
Circular Economy Business models for LED Lighting - RoI Modeling
Dr. Makarand H. (Chips) Chipalkatti, Ph.D, Dr. Chips Consulting LLC
2:30 PM
Break
Session 4: LED Packaging
3:00 PM
LED Manufacturing Improvement Via Statistical Process Control
Dr. Bill Cardoso, Creative Electron, Ph.D.
3:30 PM
4:00 PM
Flip Chip LED Assembly by Solder Paste Jet Printing
Jeff Leal, Mycronic
4:30 PM
Package Level LED Failure Mechanisms
Diganta Das, University of Maryland

Wednesday, November 30

7:30 AM
Registration and Breakfast
Speaker
Session 5: LED Failure Mechanisms
8:00 AM
Keynote Address 2: LED: Revolutions in Light and Displays
Gary Feather, NanoLumens
8:45 AM
9:15 AM
9:45 AM
Break
Session 6: Variations and Reliability
10:15 AM
10:45 AM
Manage the Complexity of LED Binning
Gorajia Jay, Mentor Graphics
11:15 AM
11:45 PM
Panel Discussion: Managing Quality of LEDs and Assemblies with LEDs
Moderator: Diganta Das
12:30 PM
Lunch
Session 7: Processing
1:30 PM
2:00 PM
2:30 PM
Closing Comment
Diganta Das, Ph.D., CALCE, University of Maryland
3:00 PM
Conference Conclusion
4:00 PM
Tour of Acuity Lighting - "Lighting Center"

Workshops

Thursday, December 1

8:00 AM
Registration
8:30 AM -
5:00 PM
Diganta Das, Ph.D., CALCE, University of Maryland



The Center for Advanced Life Cycle Engineering (CALCE), the largest electronic products and systems research center focused on electronics reliability, is dedicated to providing a knowledge and resource base to support the development of competitive electronic components, products, and systems.

Copyright (C) 2016 CALCE. All rights reserved.